State of Washington Washington Chapter 36.70A RCW
Show

§ 36.70A.815 Façade modulation and upper-level setbacks on residential projects.

Revised Code of Washington Chapter 36.70A RCW

(1)

A city or county planning under RCW 36.70A.040 may not require façade modulation or upper-level setbacks as a condition of permitting the following types of residential projects:

(a)

Affordable housing;

(b)

New construction meeting passive house requirements;

(c)

The retrofit of existing buildings meeting passive house requirements;

(d)

The conversion of existing buildings to housing or mixed-use development that includes housing;

(e)

Modular construction; or

(f)

Mass timber construction.

(2)

For the purposes of this section:

(a)

"Façade modulation" means a change in building plane, either a recess or a projection, that changes the shape of the exterior massing of the building.

(b)

"Mass timber construction" means a building with structural components primarily made of mass timber products as defined in RCW 19.27.570.

(c)

"Modular construction" means a multistory residential or commercial building constructed of standardized components produced off-site, which are transported and assembled at a final location.

(d)

"Passive house requirements" means the criteria for certification as a passive house by Phius or the international passive house institute.

(e)

"Upper-level setback" means a required distance between the lot line and the building façade applied only to portions of the building above a specified height.

[ 2025 c 139 s 6.]

← § 36.70A.813 · The whole chapter · § 36.70A.816 →